The Series 2 Impact Noise Tapping Machine

The Machine Made By Acoustic Consultants, For Acoustic Consultants

Built in England, this is our own Tapping Machine, and we have been making these for some years now. Lightweight, well-engineered and accurate, these tapping machines will give many years of reliable service.

Built in England, this is our own Tapping Machine, and we have been making these for some years now. Lightweight, well-engineered and accurate, these tapping machines will give many years of reliable service.

There is no need to pay extra for remote control or dual mains and battery operation. These come included as standard with the Sound Solutions Tapping Machine, along with optical feedback speed control. These are as-used and favoured by many of the premier acoustic consultancy practices in the UK

There is no need to pay extra for remote control or dual mains and battery operation. These come included as standard with the Sound Solutions Tapping Machine, along with optical feedback speed control. These are as-used and favoured by many of the premier acoustic consultancy practices in the UK.

Testimonials

Peter Ashford - Director, Ash Peace Ltd.

"Just a note to express our delight with your tapping hammer. We used a Bruel & Kjaer and Norsonic tapping hammers in the past, but not anymore! Your machine is light, remotely controllable and reliable. We like them so much we bought several and now only use your machines."

Ed Clarke - Technical Director, Clarke Saunders Associates - Past ANC (Association of Noise Consultants) Chairman, Senior Robust Details Inspector & ANC Examiner

"Sound Solutions have earned their position as Clarke Saunders Associates preferred supplier of tapping machines for ISO 140-7 impact testing due to a combination of good engineering design, product support and service. The machines are robust and reliable and we like the slightly retro styling."

The Finer Details

The Sound | Solutions Products Ltd. Series 2 Tapping Machine
The Machine Made By Acoustic Consultants, For Acoustic Consultants

The Finer Details

The Series 2 Impact Noise Tapping Machine

The Impact Noise Tapping Machine is designed to carry out impact sound measurements in accordance with current regulations and standards. Applications include:

  • Building acoustics
  • On-site measurement of impact noise level
  • Laboratory measurement of impact noise level.

The Impact Noise Tapping Machine includes the following technical features:

  • Light and robust
  • 2 hours of continuous operating life (integrated battery)
  • Verification through an optical system of the hammers’ impact rate and sequence
  • Visual (LED) and sound (change of rate) information in case of non standardised impact frequency
  • No lubrication required for the hammers
  • Drop height adjustment gauge fixed on the machine for simple and easy check
  • Programmable continuous operating time (5 or 20 min)
  • Remote operating through remote keyfob (provided).

PTB Type Approval status granted on 17th April 2018

Deliverables

The Series 2 Tapping Machine is delivered with the following accessories:

  • Battery (integrated into the machine)
  • Power supply
  • Wireless remote control (battery provided and receiver integrated into the machine)
  • Antenna for signal reception
  • Hammer drop height adjustment gauge
  • Certificate of conformity.

Listen To Your Machine

The TM01 tapping machine includes an electronic speed controller that integrates an optical unit for information feedback. This system allows for the validation of the proper impact rate for the hammers. If the battery is too low to ensure the proper rate, the TM01 tapping machine delivers visual information through a red LED. Furthermore, the TM01 machine changes the impact rate so that it becomes irregular. This feature is particularly useful when the user is in the receiving room. He/she will then be able to remotely diagnose a dysfunction of the machine.

Branding & Partnership

A sister company of a long-established Acoustic Consultancy Practice, Acoustic Associates Sussex Ltd, Sound Solutions Products Limited aims at offering products designed by acousticians for acousticians.

After many field measurements, as the tapping machines available on the market did not meet their expectations, the acoustic engineers at Sound Solutions Products Ltd developed their own tapping machine, the main features of which are reliability, quality and efficiency. This is the machine which is now available worldwide, either from ourselves in the UK or from our trading partners globally.

Our simple and reliable tapping machine has been available through our respected partner 01dB in many countries worldwide for a number of years.

We are now delighted to confirm that we have now concluded an additional agreement with NTi-Audio which allows them offer our tapping machine as a part of their respected product line.

Contacting Us

Address

Sound Solutions Products Limited
Unit 8 Highdown House
Shoreham (Brighton City) Airport
Shoreham-by-Sea, West Sussex
BN43 5PB

Phone

+44 (0)1273 455 074

Email

info@sndsol.co.uk

Contact Form

Please get in contact with us using the form below
Click Here To Get In Contact With Us